059
|
Absolute gross CO2 including CO2 from on-site power generation*
|
Unit |
[t CO2/yr] |
Type |
calculated |
Comment: |
Total direct emissions from raw materials, kiln
fuels and non-kiln fuels |
Validation: |
Validation Ranges for plant with kiln operation:
(n.a.)
-
(n.a.)
; Validation Ranges for grinding centre:0 - 19,824
|
Formula: |
IF(OR(
line039
="",
line043
="",
line046
=""),"",
line039
+
line043
+
line046
) |
Used in lines:
line059c
|
059c
|
Absolute gross CO2*
|
Unit |
[t CO2/yr] |
Type |
calculated |
Comment: |
Total direct emissions from raw materials, kiln
fuels and non-kiln fuels; excluding CO2 from on-site power generation ;
|
Formula: |
IF(OR(
line059
="",
line045c
=""),"",
line059
-
line045c
) |
Used in lines:
line071
,
line060
,
line063
,
line062
|
059a
|
calcination component*
|
Unit |
[t CO2/yr] |
Type |
calculated |
Comment: |
Direct emissions from raw materials; ;
|
Formula: |
line039
|
Used in lines:
line060a
,
line063a
,
line062a
|
059b
|
fuel component*
|
Used in lines:
line060b
,
line063b
,
line062b
|
071
|
Absolute net CO2*
|
Unit |
[t CO2/yr] |
Type |
calculated |
Comment: |
Total direct emissions from raw materials, kiln
fuels and non-kiln fuels, excluding CO2 from on-site power generation,
minus alternative fossil fuels |
Validation: |
Validation Ranges for plant with kiln operation:
(n.a.)
-
(n.a.)
; Validation Ranges for grinding centre:0 - 703.36
|
Formula: |
IF(OR(
line059c
="",
line041
=""),"",
line059c
-
line041
) |
Used in lines:
line073
,
line075
,
line074
|
083a
|
Absolute CO2 from biomass sources (including biomass content of mixed fuels)*
|
Unit |
[t CO2/yr] |
Type |
calculated |
Validation: |
Validation Ranges for plant with kiln operation: 0 - 2,000,000
|
Formula: |
line050
|
|
060
|
Specific gross CO2 per tonne of clinker produced*
|
Unit |
[kg CO2/t cli] |
Type |
calculated |
Comment: |
Total direct emissions, excluding CO2 from on-site
power generation, divided by own clinker production |
Validation: |
Validation Ranges for plant with kiln operation: 475 - 1,600
|
Formula: |
IF(
line008
="","",IF(
line008
=0,"n. appl.",
line059c
/
line008
*1000)) |
Used in lines:
line049c
|
060a
|
calcination component*
|
Unit |
[kg CO2/t cli] |
Type |
calculated |
Comment: |
Direct emissions from raw materials, divided by own
clinker production |
Formula: |
IF(
line008
="","",IF(
line008
=0,"n. appl.",
line059a
/
line008
*1000)) |
|
060b
|
fuel component*
|
Unit |
[kg CO2/t cli] |
Type |
calculated |
Comment: |
Direct emissions from kiln fuels and non-kiln
fuels, excluding CO2 from on-site power generation, divided by own
clinker production |
Formula: |
IF(
line008
="","",IF(
line008
=0,"n. appl.",
line059b
/
line008
*1000)) |
|
073
|
Specific net CO2 per tonne of clinker produced*
|
Unit |
[kg CO2/t cli] |
Type |
calculated |
Comment: |
Net emissions from raw materials, kiln fuels and
non-kiln fuels, excluding CO2 from on-site power generation, divided by
own clinker production |
Validation: |
Validation Ranges for plant with kiln operation: 475 - 1,600
|
Formula: |
IF(
line008
="","",IF(
line008
=0,"n. appl.",
line071
/
line008
*1000)) |
|
063
|
Specific gross CO2per tonne of cement (eq.)*
|
Unit |
[kg CO2/t cem eq.] |
Type |
calculated |
Comment: |
Total direct emissions, excluding CO2 from on-site
power generation, divided by total cement (equivalent) |
Formula: |
IF(OR(
line059c
="",
line021b
="n. appl."),"n. appl.",
line059c
/
line021b
*1000) |
|
063a
|
calcination component*
|
Unit |
[kg CO2/t cem eq.] |
Type |
calculated |
Comment: |
Direct emissions from raw materials, divided by
total cement (equivalent) |
Formula: |
IF(
line008
="","",IF(OR(
line008
=0,
line011
=0),"n. appl.",
line059a
/
line021b
*1000)) |
|
063b
|
fuel component*
|
Unit |
[kg CO2/t cem eq.] |
Type |
calculated |
Comment: |
Direct emissions from kiln fuels and non-kiln
fuels, excluding CO2 from on-site power generation, divided by total
cement (equivalent) |
Formula: |
IF(
line008
="","",IF(OR(
line008
=0,
line011
=0),"n. appl.",
line059b
/
line021b
*1000)) |
|
075
|
Specific net CO2 per tonne of cement (eq.)*
|
Unit |
[kg CO2/t cem eq.] |
Type |
calculated |
Comment: |
Net emissions from raw materials, kiln fuels and
non-kiln fuels, excluding CO2 from on-site power generation, divided by
own production of cement (equivalent) |
Validation: |
Validation Ranges for plant with kiln operation: 438.51 - 1,477
|
Formula: |
IF(OR(
line021b
="n. appl.",
line021b
=0),"n. appl.",
line071
/
line021b
*1000) |
|
062
|
Specific gross CO2 per tonne of cementitious product*
|
Unit |
[kg CO2/t cem prod] |
Type |
calculated |
Comment: |
Total direct emissions, excluding CO2 from on-site
power generation, divided by own production of cementitious products
(excluding bought clinker in cement) |
Validation: |
Validation Ranges for plant with kiln operation:
(n.a.)
-
(n.a.)
; Validation Ranges for grinding centre:0 - 300
|
Formula: |
IF(
line021a
="","",IF(
line021a
=0,"n. appl.",
line059c
/
line021a
*1000)) |
|
062a
|
calcination component
|
Unit |
[kg CO2/t cem prod] |
Type |
calculated |
Comment: |
Direct emissions from raw material calcination,
divided by own production of cementitious products |
Formula: |
IF(
line021a
="","",IF(
line021a
=0,"n. appl.",
line059a
/
line021a
*1000)) |
|
062b
|
fuel component*
|
Unit |
[kg CO2/t cem prod] |
Type |
calculated |
Comment: |
Direct emissions from kiln fuels and non-kiln
fuels, excluding CO2 from on-site power generation, divided by own
production of cementitious products |
Formula: |
IF(
line021a
="","",IF(
line021a
=0,"n. appl.",
line059b
/
line021a
*1000)) |
|
074
|
Specific net CO2 per tonne of cementitious product*
|
Unit |
[kg CO2/t cem prod] |
Type |
calculated |
Comment: |
Net emissions from raw materials, kiln fuels and
non-kiln fuels, excluding CO2 from on-site power generation, divided by
own production of cementitious products |
Validation: |
Validation Ranges for plant with kiln operation:
(n.a.)
-
(n.a.)
; Validation Ranges for grinding centre:0 - 300
|
Formula: |
IF(
line021a
="","",IF(
line021a
=0,"n. appl.",
line071
/
line021a
*1000)) |
Used in lines:
line077
|
077
|
Improvement rate - net CO2 per tonne of cementitious product*
|
Unit |
[% relative to base yr] |
Type |
calculated |
Comment: |
Reduction of specific emissions relative to base
year (default 1990) |
Formula: |
IF(
line074
="","",IF(OR(
line074
="n. appl.",
line074
=0),"n. appl.",(
line074
-
line074
)/
line074
)) |
|
082c
|
Specific indirect CO2 from external power generation per tonne of cement (eq.)*
|
|
082a
|
Specific indirect CO2 from external power generation per tonne of cementitious product
|
|
082b
|
Specific indirect CO2 from net clinker imports (+) / exports (-) per tonne of cementitious product
|
|
091
|
Net outbound clinker per net clinker consumption*
|
|
092a
|
Clinker/cement (eq.) factor**
|
Unit |
[%] |
Type |
calculated |
Comment: |
Calculated based on total clinker consumed and
total Portland + Blended cements |
Comment: |
This value is an important indicator for your production. It presents the ratio of the clinker in the cement produced. The output value is in percentage. |
Comment: |
* Clinker/cement (eq.) factor The clinker/cement (eq.) factor is defined as: Total clinker consumed / (own clinker consumed plus gypsum, lime stone, CKD plus clinker substitute consumed for blending plus clinker bought and consumed). Definition of clinker/cement (eq.) factor as in Protocol Guidance Document Version 3, Section 6.3. The factor is based on clinker consumption. Hence, in the denominator sold clinker is excluded and bought clinker is included. Cement substitutes are excluded. See also the equation for its calculation in the comment sheet. |
Validation: |
Validation Ranges for plant with kiln operation: 0 - .970; Validation Ranges for grinding centre:0 - .970
|
Formula: |
IF(OR(
line011
="",
line020
="",
line011
=0,
line020
=0),"n. appl.",
line011
/
line020
) |
Used in lines:
line021b
|
092
|
Clinker/cementitious factor*
|
Unit |
[%] |
Type |
calculated |
Comment: |
Total clinker consumed divided by the
total of cements produced |
Comment: |
* Clinker/cementitious factor Definition of clinker / cementitious factor as in Protocol Guidance Document Version 3, Section 6.3. The factor is based on clinker consumption. Hence, in the denominator sold clinker is excluded and bought clinker is included. Furthermore, cement substitutes are included. See also the equation for its calculation in the comment sheet. |
Validation: |
Validation Ranges for plant with kiln operation: 0 - .970; Validation Ranges for grinding centre:0 - .970
|
Formula: |
IF(
line021
="","",IF(
line021
=0,"n. appl.",
line011
/
line021
)) |
Used in lines:
line098c
|
093
|
Specific heat consumption of clinker production*
|
Unit |
[MJ/t cli] |
Type |
calculated |
Comment: |
Total heat consumption of kilns divided by the
clinker production |
Validation: |
Validation Ranges for plant with kiln operation: 2,800 - 9,000
|
Formula: |
IF(
line008
="","",IF(
line008
=0,"n. appl.",
line025
*10^6/
line008
)) |
Used in lines:
line098b
|
094
|
Conventional fossil fuel rate (kiln fuels)*
|
Unit |
[%] |
Type |
calculated |
Comment: |
Consumption of conventional fossil fuels divided by
the total heat consumption of kilns |
Formula: |
IF(
line025
="","",IF(
line025
=0,"n. appl.",
line026
/
line025
)) |
|
095
|
Alternative fossil fuel rate (kiln fuels)*
|
Unit |
[%] |
Type |
calculated |
Comment: |
Consumption of alternative fossil fuels divided by
the total heat consumption of kilns |
Validation: |
Validation Ranges for plant with kiln operation: 0 - 1; Validation Ranges for grinding centre:0 - 1
|
Formula: |
IF(
line025
="","",IF(
line025
=0,"n. appl.",
line027
/
line025
)) |
|
096
|
Biomass fuel rate (kiln fuels)*
|
Unit |
[%] |
Type |
calculated |
Comment: |
Consumption of biomass fuels divided by the total
heat consumption of kilns |
Validation: |
Validation Ranges for plant with kiln operation: 0 - 1; Validation Ranges for grinding centre:0 - 1
|
Formula: |
IF(
line025
="","",IF(
line025
=0,"n. appl.",
line028
/
line025
)) |
|
096a
|
CO2 emission factor for kiln fuel mix*
|
Unit |
[t CO2/GJ] |
Type |
calculated |
Comment: |
Total CO2 from fossil-based kiln fuels divided by
total heat consumption of kilns |
Formula: |
IF(
line043
="","",IF(
line043
=0,"n. appl.",
line043
/
line025
)) |
|
096b
|
Total conventional fossil fuel rate at plant level*
|
Unit |
[%] |
Type |
calculated |
Comment: |
Total conventional fossil fuel energy used in the
whole plant divided by total fuel energy use in % |
Formula: |
IF(AND(
line025
=0,
line321
=0,
line321c
=0,
line322
=0,
line323k
=0,
line323g
=0,
line323i
=0,
line324aa
=0,
line324f
=0,
line324h
=0),"n. appl.",(
line026
+
line321
+(
line321c
*(1-
line200g
))+
line322
+
line323k
+
line324aa
)/(
line025
+
line321
+
line321c
+
line322
+
line323k
+
line323g
+
line323i
+
line324aa
+
line324f
+
line324h
)) |
|
096c
|
Total alternative fossil fuel rate at plant level*
|
Unit |
[%] |
Type |
calculated |
Comment: |
Total alternative fossil fuel energy used in the
whole plant divided by total fuel energy use in % |
Formula: |
IF(AND(
line025
=0,
line321
=0,
line321c
=0,
line322
=0,
line323k
=0,
line323g
=0,
line323i
=0,
line324aa
=0,
line324f
=0,
line324h
=0),"n. appl.",(
line027
+
line323g
+
line324f
)/(
line025
+
line321
+
line321c
+
line322
+
line323k
+
line323g
+
line323i
+
line324aa
+
line324f
+
line324h
)) |
|
096d
|
Total biomass fuel rate at plant level*
|
Unit |
[%] |
Type |
calculated |
Comment: |
Total biomass fuel energy used in the whole plant
divided by total fuel energy use in % |
Formula: |
IF(AND(
line025
=0,
line321
=0,
line321c
=0,
line322
=0,
line323k
=0,
line323g
=0,
line323i
=0,
line324aa
=0,
line324f
=0,
line324h
=0),"n. appl.",(
line028
+(
line321c
*
line200g
)+
line323i
+
line324h
)/(
line025
+
line321
+
line321c
+
line322
+
line323k
+
line323g
+
line323i
+
line324aa
+
line324f
+
line324h
)) |
|
097
|
Specific total power consumption*
|
Unit |
[kWh/t cement] |
Type |
calculated |
Comment: |
Total plant power consumption divided by total
cements and substitutes produced |
Comment: |
* In this KPI the total power consumption is related to the processing of cementitous products. Hence, it is referenced to cements and substitutes produced. In the denominator sold clinker is excluded and bought clinker is included. See also the equation for its calculation in the comment sheet. Note: The reference is different from the definition, which is used to report specific CO2 emissions per ton of cementitous product in the Protocol Guidance Document Version 3, Section 6.2. |
Validation: |
Validation Ranges for plant with kiln operation: 80 - 250; Validation Ranges for grinding centre:30 - 120
|
Formula: |
IF(
line021
="","",IF(
line021
=0,"n. appl.",
line033
/
line021
*1000)) |
|
098
|
Specific power consumption of clinker production*
|
Unit |
[kWh/t clinker] |
Type |
calculated |
Comment: |
Power consumption up to and including clinker
production divided by clinker production |
Formula: |
IF(
line008
="","",IF(
line008
=0,"n. appl.",
line033e
/
line008
*1000)) |
Used in lines:
line098c
,
line098b
|
098c
|
Specific power consumption of cement production**
|
Unit |
[kWh/t cement] |
Type |
calculated |
Comment: |
Power consumption of cement production incl. power
consumption of production of clinker consumed divided by cement and
substitute production |
Comment: |
* In this KPI the power consumption of cement production is related to the processing of cementitous products. Hence, it is referenced to cements and substitutes produced. In the denominator sold clinker is excluded and bought clinker is included. See also the equation for its calculation in the comment sheet. Note: The reference is different from the definition, which is used to report specific CO2 emissions per ton of cementitous product in the Protocol Guidance Document Version 3, Section 6.2. |
Formula: |
IF(OR(
line021
="",
line021
=0),"n. appl.",IF(
line098
<>"n. appl.",(
line098
*
line092
)+(
line033
-
line033e
)*1000/
line021
,(
line033
-
line033e
)*1000/
line021
)) |
|
098a
|
National energy conversion factor*
|
Unit |
[MJ/kWh] |
Type |
calculated |
Comment: |
Optional parameter |
Used in lines:
line098b
|
098b
|
Total energy intensity of clinker production (fuel and power)*
|
|