Line-by-Line

Line-by-Line | Line-by-Line - only input lines | Line-by-Line - only calculated lines | List of Key Performance Indicators (KPI)

Note that the Cement CO₂ and Energy Protocol and the Protocol Spreadsheet have a specific line number index (see Column B in the Excel® file). These line numbers are used throughout all documents of the Protocol. They differ from the Excel® row numbers. In the Internet Manual, the index of line numbers consists of the word “line” and the line number with three digits. For some lines a small letter is added to the number, e.g. “line059c”.

Plant Sheet

General Plant Information

Table 4: Plant Sheet - General Plant Information

Line

Title

Comment

001

Plant

Unit	name
Type	text input
Instruction:	Enter here the name of the plant for which you want to report in this Plant sheet. You can use letters, numbers and spaces. You can use the button called "New plant sheet" to create a new Plant sheet in your Protocol Spreadsheet.You can also use the button "New Plant Sheet Transfer 3.04 > 3.1" to create a new Plant sheet and use it either for transferring data from CSI Protocol version 3.04 to version 3.1 or for imports from company databases. Note: All general plant information, e.g. the country and contintent, schould be enterd according to the location and specification of the plant! (and not according to the company).

002

Company

Unit	name
Type	text input
Instruction:	Enter here the name of the company to which the plant above belongs. You can use letters, numbers and spaces.

003

Country

Unit	select
Type	selection
Comment:	Selection needed
Instruction:	Please choose the country in which your plant is located. The drop-down list shows the names of several countries around the world. If the name of your country is not included, you can choose “other” Africa, Asia, America or Europe according to the continent to which your country belongs. Note: All general plant information, e.g. the country and contintent, schould be enterd according to the location and specification of the plant! (and not according to the company).

004

Continent

Unit	select
Type	selection
Comment:	Selection needed
Instruction:	Please choose the continent in which your plant is located, e.g., if your plant is located in Italy as country, then you should choose Europe as continent. Note: All general plant information, e.g. the country and contintent schould be enterd according to the location and specification of the plant! (and not according to the company).

005

"Kyoto" Region (Annex 1 or non-Annex 1)

Unit	select
Type	selection
Instruction:	This line has a drop-down list which contains only two choices: Annex1 and Non-Annex1. Choose the Kyoto region to which your company belongs. Annex I to the UNFCCC lists the developed country Parties which have special responsibilities in meeting the objective of the Convention. They include the OECD countries (excl. Mexico and Korea), the countries of Eastern Europe, Russia, and the European Union.

006

Kiln types

Unit	select
Type	selection
Comment:	Selection needed
Instruction:	Here you can choose the type of kiln used in your plant. In the drop-down list you can find the kiln types which are defined as categories in the CSI Protocol version 3. Alternatively, you can choose N/A when this information is not available.

006a

Nominal clinker capacity*

Unit	[t/d]
Type	number input
Comment:	Selection needed
Comment:	You can select the range from a drop- down list, so you do not have to enter it.
Instruction:	Here you can select the range in which your nominal daily clinker capacity lies, e.g. if your plant nominal clinker capacity is 1500 tonnes per day then you should select " 501 < X < 2000 ".

006b

Plant type*

Unit	select
Type	selection
Comment:	Selection needed
Instruction:	From a drop-down list, select the type of the plant for which you are filling in this sheet. You have many choices which distinguish the types of plant depending on the production process which is carried out at the plant level, e.g. plants which are only used for the production of grey cement are defined under the selection "Grey Cement". If this plant is not in use during the year for which you are filling in the sheet, you should select "Not in use". If your plant type is not included in the drop-down list you can choose "Other plant".

007

Shares owned by Company

Unit	[%]
Type	number input
Comment:	Please note that the value entered should be a percentage.
Instruction:	Enter a number showing the percentage of shares owned by the company here. e.g. if your company shares amount to half of the plant, then you should enter 50%. Do not enter a percentage higher than 100%.

007aa

Third party verification*

Unit	select
Type	selection
Comment:	Selection needed
Instruction:	Here please select the status of assurance or in other words third party verification. You will find the possible selections for this input in the drop-down list. Refer to the Protocol Guidance Document, Chapter 8 and Appendix A8, for further information on managing quality and requirements for assurance.

007ab

Used Cement CO2 and Energy Protocol version*

Unit	name
Type	text input
Comment:	Fixed value for all calculations and data processed with this spreadsheet
Instruction:	The Protocol version is a fixed value related to the version of the Protocl Spreadsheet and all calculations performed in it.
Default value:	V3.1

007ac

Short notes or user comment (max. 250 characters)*

Unit	name
Type	text input
Instruction:	Enter your remarks and comments regarding the data of a specific plant and reporting year in this field
Default value:	(n.a.)

* Click to see changes in V3

Inventory Boundaries: Coverage of Main Process Steps

Table 5: Plant Sheet - Inventory Boundaries: Coverage of Main Process Steps

Line

Title

Comment

"Yes" means that energy consumption and emissions data for the project step are reported

007a

Raw material supply (quarrying, mining, crushing)*

Unit	[yes, no or n.a.]
Type	selection
Instruction:	"yes" means that energy consumption and emissions data for the raw material supply (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007b

Preparation of raw materials, fuels and additives*

Unit	[yes, no or n.a.]
Type	selection
Comment:	If you select "yes", some additional lines will appear in this sheet.
Instruction:	"yes" means that energy consumption and emissions data for the preparation of raw materials, fuels and additives (kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007c

Kiln operation (pyro-processing)*

Unit	[yes, no or n.a.]
Type	selection
Comment:	If you select "yes", some additional lines will appear in this sheet.
Instruction:	"yes" means that energy consumption and emissions data for the kiln operation (pyro-processing, calcination CO2, kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007d

Cement grinding, blending*

Unit	[yes, no or n.a.]
Type	selection
Instruction:	"yes" means that energy consumption and emissions data for the cement grinding and blending (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “No” needs explanation why "No" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007e

On-site (internal) transport*

Unit	[yes, no or n.a.]
Type	selection
Instruction:	"yes" means that energy consumption and emissions data for the on-site (internal) transport (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007f

Off-site transport with company-owned fleets*

Unit	[yes, no or n.a.]
Type	selection
Instruction:	"yes" means that energy consumption and emissions data for the off-site transport with company owend fleets (non-kiln fuels) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007g

On-site power generation*

Unit	[yes, no or n.a.]
Type	selection
Comment:	If you select "yes", some additional lines may appear in this sheet.
Instruction:	"yes" means that energy consumption and emissions data for the on-site power generation (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007h

Room heating and cooling*

Unit	[yes, no or n.a.]
Type	selection
Instruction:	"yes" means that energy consumption and emissions data for the room heating and cooling (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007i

(add other processes as appropriate)*

Unit	[yes, no or n.a.]
Type	selection
Instruction:	"yes" means that energy consumption and emissions data for the additional process steps (fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007j

use of internal cement transfer for blending*

Unit	[yes, no or n.a.]
Type	selection
Instruction:	"yes" means that internal cement transfers for blending are reported. "n.a." (not applicable) means that these transfers do not exist at this plant. "no" means that these transferes exist, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

007k

Select year to copy and apply inventory boundaries (7a - 7j)*

Unit	select
Type	selection
Comment:	Use macro in line7k, column E, to copy and apply inventory boundaries to specific reporting years.

007n

1.) Select calcination CO2 method (A1; A2; B1; B2) B1=Standard (no seperate calcination sheet needed).*

Unit	select
Type	selection
Comment:	Select method for reporting CO2 emissions from raw material calcination. Use macro in column E to create coresponding calcination sheet, if missing.
Comment:	The selection of the calculation method will open few input lines in the Plant sheet. When you use the button, you will create an additional calcination sheet in your Protocol Spreadsheet. This is only requiered if you choose a method other than the default which is B1. Selection is possible if kiln operation (line 7c) is yes.
Default value:	B1

Used in lines: line034d

* Click to see changes in V3

Clinker and Cement Production

Table 6: Plant Sheet - Clinker and Cement Production

Line

Title

Comment

008

Clinker production

Unit	[t/yr]
Type	number input
Comment:	Actual clinker production of active kilns
Validation:	Validation Ranges for plant with kiln operation: 0 - 10,000,000

Used in lines: line011 , line021a , line021b , line035d , line036 , line060 , line060a , line060b , line073 , line063a , line063b , line093 , line098

009

Clinker bought from other companies and from cross-border transfer*

Unit	[t/yr]
Type	number input
Comment:	Amount of clinker purchased from other companies. See Section 7.4 of guidance document for details on company-internal transfers.

Used in lines: line011 , line049c , line091

010

Clinker sold to other companies and from cross-border transfer*

Unit	[t/yr]
Type	number input
Comment:	Amount of clinker sold to other companies. See Section 7.4 of guidance document for details on company-internal transfers.

Used in lines: line011 , line049c , line091

010a

Change in clinker stocks (+ = increase; - = reduction)*

Unit	[t/yr]
Type	number input
Comment:	Amount of clinker added to stocks (positive sign) or taken from stocks (negative sign), (=stock at end minus stock at start of the year).
Comment:	Please make sure that you have entered the value with the correct sign.

Used in lines: line011

010b

Internal clinker transfer (+ = clinker received; - = clinker sent)*

Unit	[t/yr]
Type	number input
Comment:	Amount of clinker transfers with other plants belonging to the same company
Comment:	Please make sure that you have entered the value with the correct sign.

Used in lines: line011 , line049c , line091

010c

Clinker from internal transfer of processed cement (+ = cement received; - = cement sent)*

Unit	[t/yr]
Type	number input
Comment:	Amount of clinker transfers with cement transferes with other plants belonging to the same company
Comment:	Transferred cements, that are not further processed at plant are excluded.

Used in lines: line011 , line049c , line091

011

Total clinker consumed

Unit	[t/yr]
Type	calculated
Comment:	The calculated value which will be shown in this line (normally only if you have made the entries above) represents the consumed clinker at the plant level which is used for cement production. so you should not enter any values in this line.
Formula:	IF(COUNTBLANK( line008 : line010c )=6,"", line008 + line009 - line010 - line010a + line010b + line010c )

Used in lines: line020 , line021 , line091 , line092a , line092

012

Gypsum

Unit	[t/yr, dry weight]
Type	number input
Comment:	Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation:	Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000

Used in lines: line018

013

Limestone

Unit	[t/yr, dry weight]
Type	number input
Comment:	Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation:	Validation Ranges for plant with kiln operation: 0 - 500,000; Validation Ranges for grinding centre:0 - 500,000

Used in lines: line018

014

Slag

Unit	[t/yr, dry weight]
Type	number input
Comment:	Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation:	Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: line018

015

Fly ash (for blending)

Unit	[t/yr, dry weight]
Type	number input
Comment:	Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation:	Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: line018

016

Puzzolana

Unit	[t/yr, dry weight]
Type	number input
Comment:	Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation:	Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: line018

017

Others (e.g., CKD added to cement mill)

Unit	[t/yr, dry weight]
Type	number input
Comment:	Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation:	Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000

Used in lines: line018

017a

MIC from internal transfer of processed cement (+ = cement received; - = cement sent)*

Unit	[t/yr, dry weight]
Type	number input
Comment:	Amount of MICs transfers between plants belonging to the same company
Comment:	Transferred cements, that are not further processed at plant are excluded.
Validation:	Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: line018

018

Total MIC consumed for Portland and blended cements (dry weight)

Unit	[t/yr, dry weight]
Type	calculated
Comment:	The value shown in this line is the sum of the values you have entered above in this section.
Formula:	IF(COUNTBLANK( line012 : line017a )=7,"",SUM( line012 : line017a ))

Used in lines: line020 , line021 , line021a

019a

Processed slag sold externally*

Unit	[t/yr, dry weight]
Type	number input
Comment:	This is pure slag, dried and/or ground on-site and sold externally (no company-internal transfer)
Validation:	Validation Ranges for plant with kiln operation: 0 - 3,000,000; Validation Ranges for grinding centre:0 - 3,000,000

Used in lines: line019

019b

Processed fly ash and other puzzolana sold externally*

Unit	[t/yr, dry weight]
Type	number input
Comment:	This is fly ash and other puzzolana, dried and/or ground on-site and sold externally (no company-internal transfer)
Validation:	Validation Ranges for plant with kiln operation: 0 - 3,000,000; Validation Ranges for grinding centre:0 - 3,000,000

Used in lines: line019

019c

Total internal processed MIC transfer (+ = received; - = sent)*

Unit	[t/yr, dry weight]
Type	number input
Comment:	Total amount of MICs processed on-site and transfered between plants of the same company (not sold to or purchaesd from other companies)
Validation:	Validation Ranges for plant with kiln operation: 0 - 3,000,000; Validation Ranges for grinding centre:0 - 3,000,000

Used in lines: line019

019

Total processed MIC's used as clinker or cement substitute sold externally*

Unit	[t/yr, dry weight]
Type	calculated
Formula:	IF(COUNTBLANK( line019a : line019c )=3,"",SUM( line019a : line019c ))

Used in lines: line021 , line021a

020

Total Portland and Blended cements

Unit	[t/yr]
Type	calculated
Comment:	Total cement produced (all types together except pure slag cement and direct fly ash sales)
Formula:	IF(OR( line011 ="", line018 =""),"", line011 + line018 )

Used in lines: line092a

021

Total cements + substitutes: Portland, Blended, Slag, etc.

Unit	[t/yr]
Type	calculated
Comment:	Total cements produced, excluding clinker sold, including clinker bought. Portland + Blended + Slag cements incl. direct fly ash sales
Validation:	Validation Ranges for plant with kiln operation: 0 - 15,000,000; Validation Ranges for grinding centre:0 - 15,000,000
Formula:	IF(OR( line011 ="", line018 ="", line019 =""),"", line011 + line018 + line019 )

Used in lines: line092 , line097 , line098c

021a

Total cementitious products

Unit	[t/yr]
Type	calculated
Comment:	Total clinker produced plus MIC consumed for blending and production of cement substitutes, including clinker sold, excluding clinker bought
Validation:	Validation Ranges for plant with kiln operation: 0 - 15,000,000; Validation Ranges for grinding centre:0 - 15,000,000
Formula:	IF(OR( line008 ="", line018 ="", line019 =""),"", line008 + line018 + line019 )

Used in lines: line062 , line062a , line062b , line074 , line082c , line082a , line082b

021b

Total cement equivalent*

Unit	[t/yr]
Type	calculated
Comment:	Calculated based on Clinker production and Clinker/cement (eq.) ratio
Validation:	Validation Ranges for plant with kiln operation: 0 - 15,000,000
Formula:	IF(OR( line008 ="", line008 =0, line092a ="n. appl."),"n. appl.", line008 / line092a )

Used in lines: line063 , line063a , line063b , line075 , line082c

* Click to see changes in V3

Dust Production (dry weight)

Table 7: Plant Sheet - Dust Production (dry weight)

Line

Title

Comment

022

Bypass dust leaving kiln system

Unit	[t/yr, dry weight]
Type	number input
Comment:	Only bypass dust which leaves the kiln system, e.g. for landfilling.
Default value:	0(You may put a more plant specific value here.)

Used in lines: line037

023

CKD leaving the kiln system

Unit	[t/yr, dry weight]
Type	number input
Comment:	All CKD which leaves the kiln system, e.g. for additions to cement mill, direct sale, landfilling, etc. CKD volumes added to cement mill should also be entered in line 17. CKD sold directly as a product may be entered in line 19b.
Default value:	0(You may put a more plant specific value here.)

Used in lines: line038a

024

CKD calcination rate d (Plant specific value or default 0%= dry kilns, 100%= for other kiln types)*

Unit	[%]
Type	number input
Comment:	for other kiln types. To be replaced with more precise data by Company if available. See Protocol Guideance Document, Appendix 4 for instructions.
Comment:	Please note that the value entered should be a percentage!
Validation:	Validation Ranges for plant with kiln operation: 0 - 1
Default value:	0(You may put a more plant specific value here.)

Used in lines: line038a

* Click to see changes in V3

Kiln Fuel Consumption incl. raw material and fuel drying

Table 8: Plant Sheet - Kiln Fuel Consumption incl. raw material and fuel drying

Line

Title

Comment

025

Total heat consumption of kilns*

Unit	[TJ/yr]
Type	calculated
Comment:	Sum of conventional fossil fuels, alternative fossil fuels, and biomass fuels; including fuels for drying of raw amterials and fuels
Formula:	IF(COUNTBLANK( line026 : line028 )=3,"",SUM( line026 : line028 ))

Used in lines: line025a , line093 , line094 , line095 , line096 , line096a , line096b , line096c , line096d

025a

Total heat consumption of kilns excluding drying of fuels and raw materials*

Unit	[TJ/yr]
Type	calculated
Comment:	Sum of conventional fossil fuels, alternative fossil fuels, and biomass fuels; excluding fuels for drying of raw amterials and fuels
Formula:	IF(OR( line025 ="", line184 ="", line184g ="", line184i =""),"", line025 - line184 - line184g - line184i )

026

Conventional fossil fuels

Unit	[TJ/yr]
Type	calculated
Comment:	Calculated based on consumption of individual fuels and their lower heating values
Formula:	IF(OR( line161 ="", line184 =""),"", line161 + line184 )

Used in lines: line025 , line094 , line096b

027

Alternative fuels, fossil content; excluding biomass fraction of mixed fuels*

Unit	[TJ/yr]
Type	calculated
Comment:	Calculated based on consumption of individual fuels and their lower heating values
Formula:	IF(OR( line168 ="", line184g =""),"", line168 + line184g )

Used in lines: line025 , line095 , line096c

028

Biomass fuels, incl. biomass content of alternative fuels*

Unit	[TJ/yr]
Type	calculated
Comment:	Calculated based on consumption of individual fuels and their lower heating values
Formula:	IF(OR( line175 ="", line184i =""),"", line175 + line184i )

Used in lines: line025 , line096 , line096d

* Click to see changes in V3

Non-Kiln Fuel Consumption

Table 9: Plant Sheet - Non-Kiln Fuel Consumption

Line

Title

Comment

030

Equipment and on-site vehicles

Unit	[TJ/yr]
Type	calculated
Comment:	Fuel used for quarry equipment and vehicles for internal transport
Formula:	line321 + line321c

Used in lines: line032

031a

Room heating and cooling

Unit	[TJ/yr]
Type	calculated
Comment:	Fuel used for office heating
Formula:	line322

Used in lines: line032

031b

Drying of mineral components*

Unit	[TJ/yr]
Type	calculated
Comment:	Fuel used for drying of mineral components
Formula:	IF(OR( line323k ="", line323g ="", line323i =""),"", line323k + line323g + line323i )

Used in lines: line032

031c

On-site power generation

Unit	[TJ/yr]
Type	calculated
Comment:	Fuel used for power generation on-site (autoproduction)
Formula:	IF(OR( line324aa ="", line324f ="", line324h =""),"", line324aa + line324f + line324h )

Used in lines: line032

032

Total non-kiln fuel consumption

Unit	[TJ/yr]
Type	calculated
Formula:	IF(COUNTBLANK( line030 : line031c )=4,"",SUM( line030 : line031c ))

* Click to see changes in V3

Power Balance

Table 10: Plant Sheet - Power Balance

Line

Title

Comment

033a

Total power production from separate on-site power generation*

Unit	[MWh/yr]
Type	number input
Comment:	Power production from separate on-site power generation in Mega Watt hours per year
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033ac , line033ad

033aa

Power delivered to cement plant*

Unit	[MWh/yr]
Type	number input
Comment:	Power production from separate on-site power generation delivered to the cement plant in Mega Watt hours per year
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033ac , line033

033ab

Power delivered externally*

Unit	[MWh/yr]
Type	number input
Comment:	Power production from separate on-site power generation delivered externally in Mega Watt hours per year
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033ac

033ac

Power consumed by on-site power generation equipment*

Unit	[MWh/yr]
Type	calculated
Comment:	Power consumed in the power plant from separate on-site power generation in Mega Watt hours per year
Formula:	IF(OR( line033a ="", line033aa ="", line033ab =""),"", line033a - line033aa - line033ab )

033ad

CO2 per power unit produced by separate on-site power generation*

Unit	[kg CO2/MWh]
Type	calculated
Comment:	CO2 emission factor of power produced by on-site power generation
Formula:	IF( line033a =0,"", line045c / line033a *1000)

033b

Total power production from waste heat recovery*

Unit	[MWh/yr]
Type	number input
Comment:	Power production from waste heat recovery in Mega Watt hours per year
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033bc

033ba

Power delivered to cement plant*

Unit	[MWh/yr]
Type	number input
Comment:	Power production from waste heat recovery delivered to the cement plant in Mega Watt hours per year
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033bc , line033

033bb

Power delivered externally*

Unit	[MWh/yr]
Type	number input
Comment:	Power production from waste heat recovery delivered externally in Mega Watt hours per year
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033bc

033bc

Power consumed by waste heat recovery equipment*

Unit	[MWh/yr]
Type	calculated
Comment:	Power consumed in the power plant from waste heat recovery in Mega Watt hours per year
Formula:	IF(OR( line033b ="", line033ba ="", line033bb =""),"", line033b - line033ba - line033bb )

033c

Total external power consumption for cement manufacturing*

Unit	[MWh/yr]
Type	calculated
Comment:	Power consumption for cement manufacturing including power plant (own consumption) obtained from the external grid or supplier
Formula:	IF(COUNTBLANK( line033ca : line033cc )=3,"",SUM( line033ca : line033cc ))

Used in lines: line049a

033ca

External power delivered to cement plant*

Unit	[MWh/yr]
Type	number input
Comment:	purchased power minus power sold back in case of own power production.

Used in lines: line033c , line033

033cb

Cement-related external power delivered to on-site power generation plant*

Unit	[MWh/yr]
Type	number input
Comment:	Power used for own consumption of on-site power plant obtained from the external grid or supplier
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033c

033cc

Cement-related external power delivered to waste heat recovery plant*

Unit	[MWh/yr]
Type	number input
Comment:	Power used for own consumption of waste heat recovery plant obtained from the external grid or supplier
Default value:	0(You may put a more plant specific value here.)

Used in lines: line033c

033d

CO2 per power unit produced externally

Unit	[kg CO2/MWh]
Type	number input
Comment:	Specific CO2 emission per unit grid power, to be obtained from power supplier or national authorities

Used in lines: line049a

033e

Power consumption up to and including clinker production*

Unit	[MWh/yr]
Type	number input
Comment:	Power used for clinker production (e.g. from the quarry to the clinker storage)

Used in lines: line098 , line098c

033

Total cement plant power consumption

Unit	[MWh/yr]
Type	calculated
Formula:	IF(AND( line033aa =0, line033ba =0, line033ca =""),"", line033aa + line033ba + line033ca )

Used in lines: line097 , line098c

* Click to see changes in V3

Waste Heat Use

Table 11: Plant Sheet - Waste Heat Use

Line

Title

Comment

034

Waste heat supplied to external consumers

Unit	[GJ/yr]
Type	number input
Comment:	Waste heat exported to third parties
Default value:	0(You may put a more plant specific value here.)

034a

Waste heat used internally (incl. power generation)*

Unit	[GJ/yr]
Type	number input
Comment:	Waste heat used internally (e.g. for drying of fuels or raw materials)

* Click to see changes in V3

Calculation method in calcination sheet

Table 12: Plant Sheet - Calculation method in calcination sheet

Line

Title

Comment

034d

Calculation method in calcination sheet*

Unit	A1; A2; B1; B2
Type	selection
Comment:	Selected method for reporting CO2 emissions from raw material calcination
Formula:	IF( line007n ="","", line007n )
Default value:	B1

Used in lines: line035a , line035b , line035c , line035d , line036 , line037 , line038a , line038b , line039

* Click to see changes in V3

Data for Simple Output Method (A1)

Table 13: Plant Sheet - Data for Simple Output Method (A1)

Line

Title

Comment

034e

Input CalcA1: Raw meal consumption (Line 525)*

Unit	[t/yr, dry weight]
Type	number input
Comment:	parameters for simple input method (A1)

Used in lines: line035d

034f

Input CalcA1: Total CO2 from raw materials (Line 526)*

Unit	[t CO2/yr]
Type	number input
Comment:	parameters for simple input method (A1)

Used in lines: line039

* Click to see changes in V3

Data for Detailed Output Method (A2)

Table 14: Plant Sheet - Data for Detailed Output Method (A2)

Line

Title

Comment

034i

Input CalcA2: Raw meal consumption (Line 681)*

Unit	[t/yr, dry weight]
Type	number input
Comment:	parameters for detailed input method (A2)

Used in lines: line035d

034j

Input CalcA2: Total CO2 from raw materials (Line 682)*

Unit	[t CO2/yr]
Type	number input
Comment:	parameters for detailed input method (A2)

Used in lines: line039

* Click to see changes in V3

Data for Simple Input Method (B1)

Table 15: Plant Sheet - Data for Simple Input Method (B1)

Line

Title

Comment

034m

Standard calcination emission factor [default 525 kg CO2/t clinker]*

Unit	[kg CO2/t cli]
Type	number input
Comment:	Standard parameter for simple output method (B1)
Default value:	525(You may put a more plant specific value here.)

Used in lines: line035a

034n

Organic carbon content of raw meal (average), default value 0.2%, or set plant specific value*

Unit	[%, dry weight]
Type	number input
Comment:	Standard parameter for simple output method (B1)
Default value:	0.2%(You may put a more plant specific value here.)

Used in lines: line035b

034o

Raw meal : clinker ratio, default value 1.55, or set plant specific value*

Unit	[--, dry weight]
Type	number input
Comment:	Standard parameter for simple output method (B1)
Default value:	1.55(You may put a more plant specific value here.)

Used in lines: line035c

* Click to see changes in V3

Data for Detailed Input Method (B2)

Table 16: Plant Sheet - Data for Detailed Input Method (B2)

Line

Title

Comment

034q

Input CalcB2: Calcination emission factor corrected for CaO,MgO, Ca-Si, Mg-Si imports (Line 820)*

Unit	[kg CO2/t cli]
Type	number input
Comment:	parameter for detailed output method (B2)

Used in lines: line035a

034r

Organic carbon content of raw meal (average), default value 0.2%, or set plant specific value*

Unit	[%, dry weight]
Type	number input
Comment:	Standard parameter for detailed output method (B2)
Comment:	Please note that the input value should be in percentage!
Default value:	0.2%(You may put a more plant specific value here.)

Used in lines: line035b

034s

Raw meal : clinker ratio, default value 1.55, or set plant specific value*

Unit	[--, dry weight]
Type	number input
Comment:	Standard parameter for detailed output method (B2)
Default value:	1.55(You may put a more plant specific value here.)

Used in lines: line035c

* Click to see changes in V3

CO2 from Raw Materials

Table 17: Plant Sheet - CO2 from Raw Materials

Line

Title

Comment

035a

Calcination emission factor, corrected for CaO- and MgO imports

Unit	[kg CO2/t cli]
Type	calculated
Comment:	B1: Default set equal to 525 kg CO2/ t clinker. B2: To be replaced with more precise data by Company if available (see auxiliary sheet "CalcB2")
Validation:	Validation Ranges for plant with kiln operation: 460 - 570
Formula:	IF( line034d ="B2", line034q ,IF( line034d ="B1", line034m ,"n. appl."))

Used in lines: line036 , line037 , line038a

035b

Organic carbon content of raw meal (average)

Unit	[%, dry weight]
Type	calculated
Comment:	B1, B2: Default set equal to 0.2%. To be replaced with company-specific data if raw materials with substantially higher or lower content of organic carbon are used. See Guidance document for details.
Formula:	IF( line034d ="B1", line034n ,IF( line034d ="B2", line034r ,"n. appl."))

Used in lines: line038b

035c

Raw meal : clinker ratio

Unit	[--, dry weight]
Type	calculated
Comment:	B1, B2: Default set equal to 1.55. To be replaced with company-specific data (excluding fuel ash content) if organic carbon in raw materials is of relevance. Any dust leaving the kiln system should be reflected in this ratio. Ash content of fuels should be excluded.
Formula:	IF( line034d ="B1", line034o ,IF( line034d ="B2", line034s ,"n. appl."))

Used in lines: line035d

035d

Raw meal consumption

Unit	[t/yr, dry weight]
Type	calculated
Comment:	A1, A2: Input from auxilary sheet "CalcA1", "CalcA2". B1, B2: Calculated from the raw meal : clinker ratio and the amount of clinker produced
Formula:	IF( line034d ="A1", line034e ,IF( line034d ="A2", line034i ,IF( line008 ="","", line008 * line035c )))

Used in lines: line038b

036

CO2 from calcination of raw materials consumed for clinker production*

Unit	[t CO2/yr]
Type	calculated
Comment:	B1, B2: Calculated from the calcination emission factor and the clinker production
Formula:	IF(OR( line034d ="A1", line034d ="A2"),"n. appl.",IF( line008 ="","", line035a /1000* line008 ))

Used in lines: line039

037

CO2 from calcination of bypass dust leaving the kiln system

Unit	[t CO2/yr]
Type	calculated
Comment:	B1, B2: Calculated from the calcination emission factor and the amount of bypass dust leaving the kiln system (e.g. for landfilling)
Formula:	IF(OR( line034d ="A1", line034d ="A2"),"n. appl.",IF( line022 ="","", line035a /1000* line022 ))

Used in lines: line039

038a

CO2 from calcination of CKD leaving the kiln system

Unit	[t CO2/yr]
Type	calculated
Comment:	B1, B2: Calculated from the calcination emission factor, the amount of CKD leaving the kiln system (e.g. for landfilling or sale), and the calcination rate of CKD
Formula:	IF(OR( line034d ="A1", line034d ="A2"),"n. appl.",IF( line023 ="","", line023 * line035a /1000/(1+ line035a /1000)* line024 /(1- line035a /1000/(1+ line035a /1000)* line024 )))

Used in lines: line039

038b

CO2 from organic carbon content of raw meal

Unit	[t CO2/yr]
Type	calculated
Comment:	B1, B2: Calculated from the organic carbon content of raw meal, the raw meal consumption, and the CO2 to C molar weight ratio
Formula:	IF(OR( line034d ="A1", line034d ="A2"),"n. appl.",IF( line035d ="","", line035b * line035d *3.664))

Used in lines: line039

039

Total CO2 from raw materials

Unit	[t CO2/yr]
Type	calculated
Comment:	A1, A2: Input from auxilary sheet "CalcA1", "CalcA2". B1, B2
Validation:	Validation Ranges for plant with kiln operation: (n.a.) - (n.a.)
Formula:	IF( line034d ="A1", line034f ,IF( line034d ="A2", line034j ,SUM( line036 : line038b )))

Used in lines: line048 , line059 , line059a

* Click to see changes in V3

CO2 from Kiln Fuels (incl. drying of fuels and raw materials)

Table 18: Plant Sheet - CO2 from Kiln Fuels (incl. drying of fuels and raw materials)

Line

Title

Comment

040

CO2 from conventional fossil fuels

Unit	[t CO2/yr]
Type	calculated
Comment:	Sum of CO2 emissions from conventional fossil fuels, including drying of fuels and raw materials
Formula:	IF(OR( line211 ="", line234 =""),"", line211 + line234 )

Used in lines: line043

041

CO2 from alternative fossil fuels

Unit	[t CO2/yr]
Type	calculated
Comment:	Sum of CO2 emissions from alternative fossil fuels, including drying of fuels and raw materials
Formula:	IF(OR( line218 ="", line235 =""),"", line218 + line235 )

Used in lines: line043 , line071

043

Total CO2 from fossil-based kiln fuels

Unit	[t CO2/yr]
Type	calculated
Formula:	IF(COUNTBLANK( line040 : line041 )=2,"",SUM( line040 : line041 ))

Used in lines: line048 , line059 , line059b , line096a

* Click to see changes in V3

CO2 from Non-Kiln Fuels

Table 19: Plant Sheet - CO2 from Non-Kiln Fuels

Line

Title

Comment

044

CO2 from equipment and on-site vehicles (fossil fuels)

Unit	[t CO2/yr]
Type	calculated
Comment:	Sum of CO2 emissions from equipment and on-site vehicles
Formula:	line331

Used in lines: line046 , line059b

045a

CO2 from room heating and cooling (fossil fuels)

Unit	[t CO2/yr]
Type	calculated
Comment:	Sum of CO2 emissions from room heating and cooling
Formula:	line332

Used in lines: line046 , line059b

045b

CO2 from drying of mineral components (fossil fuels)*

Unit	[t CO2/yr]
Type	calculated
Comment:	Sum of CO2 emissions from drying of mineral components
Formula:	IF(OR( line333k ="", line333g =""),"", line333k + line333g )

Used in lines: line046 , line059b

045c

CO2 from seperate on-site power generation (fossil fuels)

Unit	[t CO2/yr]
Type	calculated
Comment:	Sum of CO2 emissions from on-site power generation (excl. biomass CO2)
Formula:	IF(OR( line334aa ="", line334f =""),"", line334aa + line334f )

Used in lines: line033ad , line046 , line059c

046

Total CO2 from non-kiln fossil fuels

Unit	[t CO2/yr]
Type	calculated
Formula:	IF(COUNTBLANK( line044 : line045c )=4,"",SUM( line044 : line045c ))

Used in lines: line048 , line059

* Click to see changes in V3

Total Direct CO2 Emissions

Table 20: Plant Sheet - Total Direct CO2 Emissions

Line

Title

Comment

048

Total direct CO2: all fossil CO2 sources

Unit	[t CO2/yr]
Type	calculated
Formula:	IF(OR( line039 ="", line043 ="", line046 =""),"", line039 + line043 + line046 )

* Click to see changes in V3

Indirect CO2 Emissions (Main Sources)

Table 21: Plant Sheet - Indirect CO2 Emissions (Main Sources)

Line

Title

Comment

049a

CO2 from external power generation

Unit	[t CO2/yr]
Type	calculated
Formula:	IF( line033c =0,"", line033c * line033d /1000)

Used in lines: line049d , line082c , line082a

049b

Emission factor for inbound clinker*

Unit	[kg CO2/t cli]
Type	number input
Comment:	Default is 865 kg CO2/t clinker. This represents an average of several cement companies represented in CSI. Using this default consistently across different plants ensures that company-internal clinker transfers cancel out when consolidating emissions. The value of 865 kg CO2/t clinker in the Protocol version 3.0 is taken from the CSI GNR data base. It is the global weighted average for the years 2006/2007.
Comment:	The value of 865 kg CO2/t clinker in the Protocol version 3.0 is taken from the CSI GNR data base. It is the global weighted average for the years 2006/2007.
Validation:	Validation Ranges for plant with kiln operation: 865 - 865
Default value:	865(You may put a more plant specific value here.)

Used in lines: line049c

049c

CO2 from net inbound (+) / outbound (-) clinker*

Unit	[t CO2/yr]
Type	calculated
Comment:	Calculated by multiplying net clinker imports (= clinker bought minus clinker sold, including clinker transfers) by the default emission factor for bought clinker and subtracting CO2 emissions from sold clinker. Value will be negative if plant is net exporter of clinker. ; =(((line9 + line10b + line10c) * line49b) - (line10 * line60)) / 1000.
Formula:	IF(OR( line009 ="", line010b ="", line010c ="", line010 =""),"",IF( line060 <>"n. appl.",((( line009 + line010b + line010c )* line049b )-( line010 * line060 ))/1000,( line009 + line010b + line010c )* line049b /1000))

Used in lines: line049d , line082b

049d

Total indirect CO2 (main sources)

Unit	[t CO2/yr]
Type	calculated
Formula:	IF(OR( line049a ="", line049c =""),"", line049a + line049c )

* Click to see changes in V3

Direct CO2 from Biomass Fuels (Memo Item)

Table 22: Plant Sheet - Direct CO2 from Biomass Fuels (Memo Item)

Line

Title

Comment

050

CO2 from combustion of biomass (kiln and non-kiln fuels, incl. biomass content of mixed fuels)

Unit	[t CO2/yr]
Type	calculated
Comment:	Direct CO2 emissions from combustion of kiln and non-kiln biomass fuels and biomass content of mixed fuels
Validation:	Validation Ranges for plant with kiln operation: 0 - (n.a.) ; Validation Ranges for grinding centre:0 - 0
Formula:	IF(OR( line225 ="", line236 ="", line331c ="", line333i ="", line334h =""),"", line225 + line236 + line331c + line333i + line334h )

Used in lines: line083a

* Click to see changes in V3

Gross CO2 Emissions (= total direct CO2; all sources), excluding CO2 from onsite power generation

Table 23: Plant Sheet - Gross CO2 Emissions (= total direct CO2; all sources), excluding CO2 from onsite power generation

Line

Title

Comment

059

Absolute gross CO2 including CO2 from on-site power generation*

This line is marked as KPI.

Unit	[t CO2/yr]
Type	calculated
Comment:	Total direct emissions from raw materials, kiln fuels and non-kiln fuels
Validation:	Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 19,824
Formula:	IF(OR( line039 ="", line043 ="", line046 =""),"", line039 + line043 + line046 )

Used in lines: line059c

059c

Absolute gross CO2*

This line is marked as KPI.

Unit	[t CO2/yr]
Type	calculated
Comment:	Total direct emissions from raw materials, kiln fuels and non-kiln fuels; excluding CO2 from on-site power generation ;
Formula:	IF(OR( line059 ="", line045c =""),"", line059 - line045c )

Used in lines: line071 , line060 , line063 , line062

059a

calcination component*

This line is marked as KPI.

Unit	[t CO2/yr]
Type	calculated
Comment:	Direct emissions from raw materials; ;
Formula:	line039

Used in lines: line060a , line063a , line062a

059b

fuel component*

This line is marked as KPI.

Unit	[t CO2/yr]
Type	calculated
Comment:	Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation
Formula:	IF(OR( line043 ="", line044 ="", line045a ="", line045b =""),"", line043 + line044 + line045a + line045b )

Used in lines: line060b , line063b , line062b

071

Absolute net CO2*

This line is marked as KPI.

Unit	[t CO2/yr]
Type	calculated
Comment:	Total direct emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, minus alternative fossil fuels
Validation:	Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 703.36
Formula:	IF(OR( line059c ="", line041 =""),"", line059c - line041 )

Used in lines: line073 , line075 , line074

083a

Absolute CO2 from biomass sources (including biomass content of mixed fuels)*

This line is marked as KPI.

Unit	[t CO2/yr]
Type	calculated
Validation:	Validation Ranges for plant with kiln operation: 0 - 2,000,000
Formula:	line050

* Click to see changes in V3

Specific Gross and Net CO2 Emissions per Clinker Produced

Table 24: Plant Sheet - Specific Gross and Net CO2 Emissions per Clinker Produced

Line

Title

Comment

060

Specific gross CO2 per tonne of clinker produced*

This line is marked as KPI.

Unit	[kg CO2/t cli]
Type	calculated
Comment:	Total direct emissions, excluding CO2 from on-site power generation, divided by own clinker production
Validation:	Validation Ranges for plant with kiln operation: 475 - 1,600
Formula:	IF( line008 ="","",IF( line008 =0,"n. appl.", line059c / line008 *1000))

Used in lines: line049c

060a

calcination component*

This line is marked as KPI.

Unit	[kg CO2/t cli]
Type	calculated
Comment:	Direct emissions from raw materials, divided by own clinker production
Formula:	IF( line008 ="","",IF( line008 =0,"n. appl.", line059a / line008 *1000))

060b

fuel component*

This line is marked as KPI.

Unit	[kg CO2/t cli]
Type	calculated
Comment:	Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own clinker production
Formula:	IF( line008 ="","",IF( line008 =0,"n. appl.", line059b / line008 *1000))

073

Specific net CO2 per tonne of clinker produced*

This line is marked as KPI.

Unit	[kg CO2/t cli]
Type	calculated
Comment:	Net emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own clinker production
Validation:	Validation Ranges for plant with kiln operation: 475 - 1,600
Formula:	IF( line008 ="","",IF( line008 =0,"n. appl.", line071 / line008 *1000))

* Click to see changes in V3

Specific Gross and Net CO2 Emissions per Cement (equivalent)

Table 25: Plant Sheet - Specific Gross and Net CO2 Emissions per Cement (equivalent)

Line

Title

Comment

063

Specific gross CO2per tonne of cement (eq.)*

This line is marked as KPI.

Unit	[kg CO2/t cem eq.]
Type	calculated
Comment:	Total direct emissions, excluding CO2 from on-site power generation, divided by total cement (equivalent)
Formula:	IF(OR( line059c ="", line021b ="n. appl."),"n. appl.", line059c / line021b *1000)

063a

calcination component*

This line is marked as KPI.

Unit	[kg CO2/t cem eq.]
Type	calculated
Comment:	Direct emissions from raw materials, divided by total cement (equivalent)
Formula:	IF( line008 ="","",IF(OR( line008 =0, line011 =0),"n. appl.", line059a / line021b *1000))

063b

fuel component*

This line is marked as KPI.

Unit	[kg CO2/t cem eq.]
Type	calculated
Comment:	Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by total cement (equivalent)
Formula:	IF( line008 ="","",IF(OR( line008 =0, line011 =0),"n. appl.", line059b / line021b *1000))

075

Specific net CO2 per tonne of cement (eq.)*

This line is marked as KPI.

Unit	[kg CO2/t cem eq.]
Type	calculated
Comment:	Net emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own production of cement (equivalent)
Validation:	Validation Ranges for plant with kiln operation: 438.51 - 1,477
Formula:	IF(OR( line021b ="n. appl.", line021b =0),"n. appl.", line071 / line021b *1000)

* Click to see changes in V3

Specific Gross and Net CO2 Emissions per Cementitious Produced

Table 26: Plant Sheet - Specific Gross and Net CO2 Emissions per Cementitious Produced

Line

Title

Comment

062

Specific gross CO2 per tonne of cementitious product*

This line is marked as KPI.

Unit	[kg CO2/t cem prod]
Type	calculated
Comment:	Total direct emissions, excluding CO2 from on-site power generation, divided by own production of cementitious products (excluding bought clinker in cement)
Validation:	Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 300
Formula:	IF( line021a ="","",IF( line021a =0,"n. appl.", line059c / line021a *1000))

062a

calcination component

This line is marked as KPI.

Unit	[kg CO2/t cem prod]
Type	calculated
Comment:	Direct emissions from raw material calcination, divided by own production of cementitious products
Formula:	IF( line021a ="","",IF( line021a =0,"n. appl.", line059a / line021a *1000))

062b

fuel component*

This line is marked as KPI.

Unit	[kg CO2/t cem prod]
Type	calculated
Comment:	Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own production of cementitious products
Formula:	IF( line021a ="","",IF( line021a =0,"n. appl.", line059b / line021a *1000))

074

Specific net CO2 per tonne of cementitious product*

This line is marked as KPI.

Unit	[kg CO2/t cem prod]
Type	calculated
Comment:	Net emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own production of cementitious products
Validation:	Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 300
Formula:	IF( line021a ="","",IF( line021a =0,"n. appl.", line071 / line021a *1000))

Used in lines: line077

077

Improvement rate - net CO2 per tonne of cementitious product*

This line is marked as KPI.

Unit	[% relative to base yr]
Type	calculated
Comment:	Reduction of specific emissions relative to base year (default 1990)
Formula:	IF( line074 ="","",IF(OR( line074 ="n. appl.", line074 =0),"n. appl.",( line074 - line074 )/ line074 ))

* Click to see changes in V3

Specific CO2 from Indirect and Biomass Sources

Table 27: Plant Sheet - Specific CO2 from Indirect and Biomass Sources

Line

Title

Comment

082c

Specific indirect CO2 from external power generation per tonne of cement (eq.)*

This line is marked as KPI.

Unit	[kg CO2/t cem prod]
Type	calculated
Formula:	IF(OR( line021b ="n. appl.", line021b =0),"n. appl.", line049a / line021b *1000)

082a

Specific indirect CO2 from external power generation per tonne of cementitious product

This line is marked as KPI.

Unit	[kg CO2/t cem prod]
Type	calculated
Formula:	IF( line021a ="","",IF( line021a =0,"n. appl.", line049a / line021a *1000))

082b

Specific indirect CO2 from net clinker imports (+) / exports (-) per tonne of cementitious product

This line is marked as KPI.

Unit	[kg CO2/t cem prod]
Type	calculated
Formula:	IF( line021a ="","",IF( line021a =0,"n. appl.", line049c / line021a *1000))

* Click to see changes in V3

General Performance Indicators

Table 28: Plant Sheet - General Performance Indicators

Line

Title

Comment

091

Net outbound clinker per net clinker consumption*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	percentage of direct clinker sales versus clinker consumed to produce cement
Formula:	IF( line011 ="","",IF( line011 =0,"n. appl.",( line010 - line009 - line010b - line010c )/ line011 ))

092a

Clinker/cement (eq.) factor**

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Calculated based on total clinker consumed and total Portland + Blended cements
Comment:	This value is an important indicator for your production. It presents the ratio of the clinker in the cement produced. The output value is in percentage.
Comment:	* Clinker/cement (eq.) factor The clinker/cement (eq.) factor is defined as: Total clinker consumed / (own clinker consumed plus gypsum, lime stone, CKD plus clinker substitute consumed for blending plus clinker bought and consumed). Definition of clinker/cement (eq.) factor as in Protocol Guidance Document Version 3, Section 6.3. The factor is based on clinker consumption. Hence, in the denominator sold clinker is excluded and bought clinker is included. Cement substitutes are excluded. See also the equation for its calculation in the comment sheet.
Validation:	Validation Ranges for plant with kiln operation: 0 - .970; Validation Ranges for grinding centre:0 - .970
Formula:	IF(OR( line011 ="", line020 ="", line011 =0, line020 =0),"n. appl.", line011 / line020 )

Used in lines: line021b

092

Clinker/cementitious factor*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Total clinker consumed divided by the total of cements produced
Comment:	* Clinker/cementitious factor Definition of clinker / cementitious factor as in Protocol Guidance Document Version 3, Section 6.3. The factor is based on clinker consumption. Hence, in the denominator sold clinker is excluded and bought clinker is included. Furthermore, cement substitutes are included. See also the equation for its calculation in the comment sheet.
Validation:	Validation Ranges for plant with kiln operation: 0 - .970; Validation Ranges for grinding centre:0 - .970
Formula:	IF( line021 ="","",IF( line021 =0,"n. appl.", line011 / line021 ))

Used in lines: line098c

093

Specific heat consumption of clinker production*

This line is marked as KPI.

Unit	[MJ/t cli]
Type	calculated
Comment:	Total heat consumption of kilns divided by the clinker production
Validation:	Validation Ranges for plant with kiln operation: 2,800 - 9,000
Formula:	IF( line008 ="","",IF( line008 =0,"n. appl.", line025 *10^6/ line008 ))

Used in lines: line098b

094

Conventional fossil fuel rate (kiln fuels)*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Consumption of conventional fossil fuels divided by the total heat consumption of kilns
Formula:	IF( line025 ="","",IF( line025 =0,"n. appl.", line026 / line025 ))

095

Alternative fossil fuel rate (kiln fuels)*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Consumption of alternative fossil fuels divided by the total heat consumption of kilns
Validation:	Validation Ranges for plant with kiln operation: 0 - 1; Validation Ranges for grinding centre:0 - 1
Formula:	IF( line025 ="","",IF( line025 =0,"n. appl.", line027 / line025 ))

096

Biomass fuel rate (kiln fuels)*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Consumption of biomass fuels divided by the total heat consumption of kilns
Validation:	Validation Ranges for plant with kiln operation: 0 - 1; Validation Ranges for grinding centre:0 - 1
Formula:	IF( line025 ="","",IF( line025 =0,"n. appl.", line028 / line025 ))

096a

CO2 emission factor for kiln fuel mix*

This line is marked as KPI.

Unit	[t CO2/GJ]
Type	calculated
Comment:	Total CO2 from fossil-based kiln fuels divided by total heat consumption of kilns
Formula:	IF( line043 ="","",IF( line043 =0,"n. appl.", line043 / line025 ))

096b

Total conventional fossil fuel rate at plant level*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Total conventional fossil fuel energy used in the whole plant divided by total fuel energy use in %
Formula:	IF(AND( line025 =0, line321 =0, line321c =0, line322 =0, line323k =0, line323g =0, line323i =0, line324aa =0, line324f =0, line324h =0),"n. appl.",( line026 + line321 +( line321c *(1- line200g ))+ line322 + line323k + line324aa )/( line025 + line321 + line321c + line322 + line323k + line323g + line323i + line324aa + line324f + line324h ))

096c

Total alternative fossil fuel rate at plant level*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Total alternative fossil fuel energy used in the whole plant divided by total fuel energy use in %
Formula:	IF(AND( line025 =0, line321 =0, line321c =0, line322 =0, line323k =0, line323g =0, line323i =0, line324aa =0, line324f =0, line324h =0),"n. appl.",( line027 + line323g + line324f )/( line025 + line321 + line321c + line322 + line323k + line323g + line323i + line324aa + line324f + line324h ))

096d

Total biomass fuel rate at plant level*

This line is marked as KPI.

Unit	[%]
Type	calculated
Comment:	Total biomass fuel energy used in the whole plant divided by total fuel energy use in %
Formula:	IF(AND( line025 =0, line321 =0, line321c =0, line322 =0, line323k =0, line323g =0, line323i =0, line324aa =0, line324f =0, line324h =0),"n. appl.",( line028 +( line321c * line200g )+ line323i + line324h )/( line025 + line321 + line321c + line322 + line323k + line323g + line323i + line324aa + line324f + line324h ))

097

Specific total power consumption*

This line is marked as KPI.

Unit	[kWh/t cement]
Type	calculated
Comment:	Total plant power consumption divided by total cements and substitutes produced
Comment:	* In this KPI the total power consumption is related to the processing of cementitous products. Hence, it is referenced to cements and substitutes produced. In the denominator sold clinker is excluded and bought clinker is included. See also the equation for its calculation in the comment sheet. Note: The reference is different from the definition, which is used to report specific CO2 emissions per ton of cementitous product in the Protocol Guidance Document Version 3, Section 6.2.
Validation:	Validation Ranges for plant with kiln operation: 80 - 250; Validation Ranges for grinding centre:30 - 120
Formula:	IF( line021 ="","",IF( line021 =0,"n. appl.", line033 / line021 *1000))

098

Specific power consumption of clinker production*

This line is marked as KPI.

Unit	[kWh/t clinker]
Type	calculated
Comment:	Power consumption up to and including clinker production divided by clinker production
Formula:	IF( line008 ="","",IF( line008 =0,"n. appl.", line033e / line008 *1000))

Used in lines: line098c , line098b

098c

Specific power consumption of cement production**

This line is marked as KPI.

Unit	[kWh/t cement]
Type	calculated
Comment:	Power consumption of cement production incl. power consumption of production of clinker consumed divided by cement and substitute production
Comment:	* In this KPI the power consumption of cement production is related to the processing of cementitous products. Hence, it is referenced to cements and substitutes produced. In the denominator sold clinker is excluded and bought clinker is included. See also the equation for its calculation in the comment sheet. Note: The reference is different from the definition, which is used to report specific CO2 emissions per ton of cementitous product in the Protocol Guidance Document Version 3, Section 6.2.
Formula:	IF(OR( line021 ="", line021 =0),"n. appl.",IF( line098 <>"n. appl.",( line098 * line092 )+( line033 - line033e )1000/ line021 ,( line033 - line033e )1000/ line021 ))

098a

National energy conversion factor*

This line is marked as KPI.

Unit	[MJ/kWh]
Type	calculated
Comment:	Optional parameter

Used in lines: line098b

098b

Total energy intensity of clinker production (fuel and power)*

This line is marked as KPI.

Unit	[MJ/t cli]
Type	calculated
Comment:	Optional result
Formula:	IF( line098a <>"", line098 * line098a + line093 ,"")

* Click to see changes in V3

Kiln Fuel Consumption in tonnes per year

Table 29: Plant Sheet - Kiln Fuel Consumption in tonnes per year

Line

Title

Comment

101

Conventional fossil fuels (excl. drying of raw materials and fuels)

This table lists the consumption of conventional fossil fuels in tonnes per year, excluding fuels for drying of raw materials and fuels. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

102

coal + anthracite

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line162

103

petrol coke

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line163

104

(ultra) heavy fuel

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line164

105

diesel oil

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line165

106

natural gas

Unit	[1'000 Nm3/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line166

107

shale

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line167

107a

lignite

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line167a

108

Alternative fossil and mixed fuels (excl. drying of raw materials and fuels)*

This table lists the consumption of alternative fossil fuels in tonnes per year, excluding fuels for drying of raw materials and fuels. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

109

waste oil

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line169 , line183a , line233a

110

tyres

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line170 , line183a , line233a

111

RDF including plastics*

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line171 , line183a , line233a

112

solvents

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line172 , line183a , line233a

113

impregnated saw dust

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line173 , line183a , line233a

113a

mixed industrial waste

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line173a , line183a , line233a

114

other fossil based wastes and mixed fuels

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line174 , line183a , line233a

115

Biomass fuels (excl. drying of raw materials and fuels)*

This table lists the consumption of alternative fossil fuels in tonnes per year, excluding fuels for drying of raw materials and fuels. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

116

dried sewage sludge

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line176

117

wood, non impregnated saw dust

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line177

118

paper, carton

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line178

119

animal meal

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line179

120

animal bone meal

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line180

121

animal fat

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line181

122

agricultural, organic, diaper waste, charcoal

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line182

123

other biomass

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line183

* Click to see changes in V3

Drying of raw materials and fuels

Table 30: Plant Sheet - Drying of raw materials and fuels

Line

Title

Comment

124

Conventional fossil fuels*

This table lists the consumption of conventional fossil fuels for drying of raw materials and fuels in tonnes per year. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

124a

coal + anthracite + lignite*

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184a

124b

petrol coke*

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184b

124c

(ultra) heavy fuel*

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184c

124d

diesel oil*

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184d

124e

natural gas*

Unit	[1'000 Nm3/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184e

124f

shale*

Unit	[t/yr]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184f

125a

other fossil based wastes and mixed fuels*

Unit	[t/yr]
Type	number input
Comment:	Consumption of alternative fossil fuels for drying of raw materials and fuels in tonnes per year. Fuel types are clustered for reasons of simplicity.
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184h , line184j , line236a

126a

other biomass*

Unit	[t/yr]
Type	number input
Comment:	Consumption of biomass fuels for drying of raw materials and fuels in tonnes per year. Fuel types are clustered for reasons of simplicity.
Validation:	Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184j , line236a

* Click to see changes in V3

Fuel Lower Heating Values

Table 31: Plant Sheet - Fuel Lower Heating Values

Line

Title

Comment

Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).

132

coal + anthracite

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 5 - 40; Validation Ranges for grinding centre:5 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line162

133

petrol coke

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 30 - 45; Validation Ranges for grinding centre:30 - 45
Default value:	0(You may put a more plant specific value here.)

Used in lines: line163

134

(ultra) heavy fuel

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Default value:	0(You may put a more plant specific value here.)

Used in lines: line164

135

diesel oil

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Default value:	0(You may put a more plant specific value here.)

Used in lines: line165

136

natural gas

Unit	[GJ/1'000 Nm3]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line166

137

shale

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line167

137a

lignite

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line167a

Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).

139

waste oil

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Default value:	0(You may put a more plant specific value here.)

Used in lines: line169 , line183a , line233a

140

tyres

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line170 , line183a , line233a

141

RDF including plastics*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line171 , line183a , line233a

142

solvents

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line172 , line183a , line233a

143

impregnated saw dust

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line173 , line183a , line233a

143a

mixed industrial waste

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line173a , line183a , line233a

144

other fossil based wastes and mixed fuels

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line174 , line183a , line233a

Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).

146

sewage sludge*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line176

147

wood, non impregnated saw dust*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line177

148

paper, carton*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line178

149

animal meal*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line179

150

animal bone meal*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line180

151

animal fat*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line181

152

agricultural, organic, diaper waste, charcoal*

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line182

153

other biomass

Unit	[GJ/t]
Type	number input
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line183

* Click to see changes in V3

Drying of raw materials and fuels

Table 32: Plant Sheet - Drying of raw materials and fuels

Line

Title

Comment

154

Conventional fossil fuels*

Average lower heating value (= net calorific value) of fuels, expressed in GJ per t of consumed fuel. Default lower heating values are taken from the lines 132-137a (fuel lower heating values of conventional fossil fuels). Enter more specific lower heating values for this fuel if available.

154a

coal + anthracite + lignite*

Unit	[GJ/t]
Type	number input
Instruction:	This line is per default referenced to the lower heating value in line132 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation:	Validation Ranges for plant with kiln operation: 5 - 40; Validation Ranges for grinding centre:5 - 40
Formula:	line132
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184a

154b

petrol coke*

Unit	[GJ/t]
Type	number input
Instruction:	This line is per default referenced to the lower heating value in line133 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation:	Validation Ranges for plant with kiln operation: 30 - 45; Validation Ranges for grinding centre:30 - 45
Formula:	line133
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184b

154c

(ultra) heavy fuel*

Unit	[GJ/t]
Type	number input
Instruction:	This line is per default referenced to the lower heating value in line134 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation:	Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Formula:	line134
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184c

154d

diesel oil*

Unit	[GJ/t]
Type	number input
Instruction:	This line is per default referenced to the lower heating value in line135 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation:	Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Formula:	line135
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184d

154e

natural gas*

Unit	[GJ/1'000 Nm3]
Type	number input
Instruction:	This line is per default referenced to the lower heating value in line136 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Formula:	line136
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184e

154f

shale*

Unit	[GJ/t]
Type	number input
Instruction:	This line is per default referenced to the lower heating value in line137 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Formula:	line137
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184f

155a

other fossil based wastes and mixed fuels*

Unit	[GJ/t]
Type	number input
Comment:	Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).
Validation:	Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184h , line184j , line236a

156a

other biomass*

Unit	[GJ/t]
Type	number input
Comment:	Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).
Validation:	Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value:	0(You may put a more plant specific value here.)

Used in lines: line184j , line236a

* Click to see changes in V3

Kiln Fuel Consumption in terajoules (TJ) per year

Table 33: Plant Sheet - Kiln Fuel Consumption in terajoules (TJ) per year

Line

Title

Comment

161

Conventional fossil fuels

Unit	[TJ/yr]
Type	calculated
Comment:	This is the total heat consumption of all conventional fossil kiln fuels. This result is registered in line 26 above
Formula:	IF(COUNTBLANK( line162 : line167a )=7,"",SUM( line162 : line167a ))

Used in lines: line026

Heat consumption of conventional fossil kiln fuels, calculated from the amount of each fuel and their lower heating values

162

coal + anthracite

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line102 ="","", line102 * line132 /1000)

Used in lines: line161 , line212

163

petrol coke

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line103 ="","", line103 * line133 /1000)

Used in lines: line161 , line213

164

(ultra) heavy fuel

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line104 ="","", line104 * line134 /1000)

Used in lines: line161 , line214

165

diesel oil

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line105 ="","", line105 * line135 /1000)

Used in lines: line161 , line215

166

natural gas

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line106 ="","", line106 * line136 /1000)

Used in lines: line161 , line216

167

shale

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line107 ="","", line107 * line137 /1000)

Used in lines: line161 , line217

167a

lignite

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line107a ="","", line107a * line137a /1000)

Used in lines: line161 , line217a

168

Alternative fossil and mixed fuels, excluding biomass fraction of mixed fuels*

Unit	[TJ/yr]
Type	calculated
Comment:	This is the total heat consumption of all alternative fossil kiln fuels. This result is registered in line 27 above
Formula:	IF(COUNTBLANK( line169 : line174 )=7,"",SUM( line169 : line174 ))

Used in lines: line027

Heat consumption of alternative fossil kiln fuels, calculated from the amount of each fuel and their lower heating values

169

waste oil*

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line109 ="","", line109 ( line139 /1000)(1- line200a ))

Used in lines: line168 , line219

170

tyres*

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line110 ="","", line110 ( line140 /1000)(1- line200b ))

Used in lines: line168 , line220

171

RDF including plastics*

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line111 ="","", line111 ( line141 /1000)(1- line200c ))

Used in lines: line168 , line221

172

solvents*

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line112 ="","", line112 ( line142 /1000)(1- line200d ))

Used in lines: line168 , line222

173

impregnated saw dust*

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line113 ="","", line113 ( line143 /1000)(1- line200e ))

Used in lines: line168 , line223

173a

mixed industrial waste*

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line113a ="","", line113a ( line143a /1000)(1- line200f ))

Used in lines: line168 , line223a

174

other fossil based wastes (excl. biomass content of mixed fuels)*

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line114 ="","", line114 ( line144 /1000)(1- line200h ))

Used in lines: line168 , line224

175

Biomass fuels - total, incl. biomass cont. from alternative fossil fuels*

Unit	[TJ/yr]
Type	calculated
Comment:	This is the total heat consumption of all biomass kiln fuels. This result is registered in line 28 above
Formula:	IF(COUNTBLANK( line176 : line183a )=9,"",SUM( line176 : line183a ))

Used in lines: line028

Heat consumption of biomass kiln fuels, calculated from the amount of each fuel and their lower heating values

176

sewage sludge

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line116 ="","", line116 * line146 /1000)

Used in lines: line175 , line226

177

wood, non impregnated saw dust

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line117 ="","", line117 * line147 /1000)

Used in lines: line175 , line227

178

paper, carton

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line118 ="","", line118 * line148 /1000)

Used in lines: line175 , line228

179

animal meal

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line119 ="","", line119 * line149 /1000)

Used in lines: line175 , line229

180

animal bone meal

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line120 ="","", line120 * line150 /1000)

Used in lines: line175 , line230

181

animal fat

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line121 ="","", line121 * line151 /1000)

Used in lines: line175 , line231

182

agricultural, organic, diaper waste, charcoal

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line122 ="","", line122 * line152 /1000)

Used in lines: line175 , line232

183

other biomass

Unit	[TJ/yr]
Type	calculated
Formula:	IF( line123 ="","", line123 * line153 /1000)

Used in lines: line175 , line233

183a

biomass content from alternative fuels*

Unit	[TJ/yr]
Type	calculated
Formula:	( line109 * line139 * line200a + line110 * line140 * line200b + line111 * line141 * line200c + line112 * line142 * line200d + line113 * line143 * line200e + line113a * line143a * line200f + line114 * line144 * line200h )/1000

Used in lines: